I have been busy this month not to update my blog. Anyway, those with the new zc32s could now make their rides similar to the swift r concept. Sporty looking ride.
Thursday, 18 July 2013
Tuesday, 9 July 2013
Swift R new shelter
Normally, my swift hibernates on the concrete mat under the galvanized roof of my family home garage, but now the area had to be cleared for my brother's new Mazda 6. Well, the Mazda is more wider and longer than the optima parked on its side.
Temporarily, my dad has built a new strengthened tent just for the Swifts. The specially made white tent allows reflection of heat and is erected tightly with iron wires to prevent the clogging of rain water on top. The grassy ground is not yet cemented and 3 steel pipes are pushed deeply into the ground and roped tightly to the coconut stumps. This prevent the shelter from sudden collapsing especially during intense storms.
Temporarily, my dad has built a new strengthened tent just for the Swifts. The specially made white tent allows reflection of heat and is erected tightly with iron wires to prevent the clogging of rain water on top. The grassy ground is not yet cemented and 3 steel pipes are pushed deeply into the ground and roped tightly to the coconut stumps. This prevent the shelter from sudden collapsing especially during intense storms.
Monday, 8 July 2013
Wednesday, 3 July 2013
Risky drive on loosened wheels
Though the exhaust pipes already welded in place, somehow the noise it created dampen my driving mood. I almost thought that the squeaking noise comes from something hitting the tail pipes even after rubbers already being placed beside the second tail pipe manifold.
After several checking, the source of the annoying noise was found. The noise was not from the exhaust piping but from the untightened bolts of rear wheels/ rims. I think the workers probably loosened the bolts of the rear wheels when fitting the new bumper but they forget to tighten it.
After several checking, the source of the annoying noise was found. The noise was not from the exhaust piping but from the untightened bolts of rear wheels/ rims. I think the workers probably loosened the bolts of the rear wheels when fitting the new bumper but they forget to tighten it.